{"title":"Home page","description":null,"products":[{"product_id":"p40800","title":"13 inch Two-Speed Spiral Cutterhead Benchtop Planer","description":"\u003cdiv class=\"blog-container\"\u003e\n\u003cp\u003eThe SHINMAX 13-inch Spiral Cutterhead Benchtop Planer turns rough or uneven boards into smooth, consistent pieces of the same thickness. This portable thickness planer adopts a compact benchtop design that stays stable during operation and features a spiral cutterhead for precise, tear-out-free results. It is ideal for small workshops, job sites, and light professional use.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003ch3\u003eSmooth Spiral Cutting\u003c\/h3\u003e\n\u003cp\u003eThe 2” spiral cutterhead is equipped with 26 replaceable, indexable inserts (the planer’s cutting blades), each with two sharp cutting edges. When one edge dulls, simply rotate the insert 90° to use the fresh edge.\u003c\/p\u003e\n\u003cp\u003eTwo-sided inserts sit in precise alignment with spiral cutterhead, and the unused edge helps lock each insert in place, preventing movement or skewing during planing. This stable design ensures superior precision compared with four-sided inserts. The inserts are available in high-speed steel (HSS) for cost-effective cutting or tungsten carbide for long-lasting performance on hardwoods.\u003c\/p\u003e\n\u003cp\u003eThanks to its spiral configuration and replaceable inserts, this cutterhead not only produces smoother surfaces, quieter operation, and less tear-out, but also reduces overall maintenance and replacement costs compared with traditional straight-knife planers.\u003c\/p\u003e\n\u003ch3\u003eTwo-Speed Feed Control\u003c\/h3\u003e\n\u003cp\u003eSwitch between feed rates to match your material. The 2-speed lever lets you slow down the speed to 16 fpm when planing hardwood or figured wood, reducing tear-out and producing a finer, smoother finish. For general stock removal, return to the higher speed for faster throughput - all with one simple adjustment.\u003c\/p\u003e\n\u003ch3\u003eStable and Accurate Thicknessing\u003c\/h3\u003e\n\u003cp\u003eThe cutterhead assembly is designed to stay perfectly level throughout each pass. Depending on the model, it is either supported by four lead screws, used in models 40600H, 40700H \u0026amp; 40800H, or by a dual-lead-screw and four-guide-post system in model 40200H. Both designs, paired with infeed and outfeed rollers plus snipe minimizers or a snipe-lock system, maintain cutterhead stability and prevent uneven cuts at the start or end of each board.\u003c\/p\u003e\n\u003ch3\u003eConsistent Results for Single or Multiple Boards\u003c\/h3\u003e\n\u003cp\u003eThe large handwheel and depth-of-cut indicator make it simple to set precise thicknesses. A repeat cut depth stop allows you to produce multiple boards at the same thickness without repeated measuring.\u003c\/p\u003e\n\u003ch3\u003eEfficient Dust Collection\u003c\/h3\u003e\n\u003cp\u003eThe flip dust hood includes 2½” and 4” ports for easy connection to dust collectors. It can be positioned upward to let sawdust discharge freely out the back, or flipped downward to attach a dust collector for optimal chip removal. Effective dust extraction keeps the workspace cleaner, helps maintain blade sharpness, and extends the machine’s service life.\u003c\/p\u003e\n\u003ch3\u003ePortable Thickness Planer Design\u003c\/h3\u003e\n\u003cp\u003eThe 70 lb benchtop design is sturdy yet portable, making it suitable for small workshops or job sites. Onboard tool storage allows for quick insert rotation or replacement during routine maintenance.\u003c\/p\u003e\n\u003cp\u003eReady to bring the SHINMAX 13-inch Spiral Cutterhead Benchtop Planer to your market? \u003ca rel=\"noopener\" href=\"https:\/\/shinmaxind.com\/pages\/contact\" target=\"_blank\"\u003eContact us today\u003c\/a\u003e to discuss distribution opportunities, bulk orders, or customized specifications for your region.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 120V \/ 15A \/ 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Speed (Armature):\u003c\/strong\u003e 23,000 RPM (Revolutions Per Minute)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterhead Type:\u003c\/strong\u003e Spiral, 2” diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 10,000 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlades\/Inserts:\u003c\/strong\u003e 26 two-edge inserts (HSS or tungsten carbide)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Depth of Cut:\u003c\/strong\u003e ⅛” (0.125”)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Cutting Width:\u003c\/strong\u003e 13”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Stock Thickness:\u003c\/strong\u003e 6”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed Rate:\u003c\/strong\u003e 26 \/ 16 FPM (Feet per Minute)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Size (W × D × H):\u003c\/strong\u003e 22¼\" x 34⅝\" x 19⅞\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Table Size:\u003c\/strong\u003e 14” × 12”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 2½” \u0026amp; 4”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2½” \u0026amp; 4”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weigh:\u003c\/strong\u003e 69.2 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\n    .blog-container p {\n      font-size: 16px;\n      line-height: 1.6;\n      margin-bottom: 1.5em;\n    }\n\n    .blog-container h2 {\n      font-size: 28px;\n      line-height: 1.5;\n      margin-top: 2.4em;\n      margin-bottom: 1em;\n      font-weight: 700;\n    }\n\n    .blog-container h3 {\n      font-size: 20px;\n      line-height: 1.5;\n      margin-top: 2em;\n      margin-bottom: 0.8em;\n      font-weight: 700;\n    }\n\n    .blog-container h4 {\n      font-size: 18px;\n      line-height: 1.5;\n      margin-top: 2em;\n      margin-bottom: 0.8em;\n      font-weight: 700;\n    }\n\n    .blog-container ul,\n    .blog-container ol {\n      line-height: 2;\n      padding-left: 1.2em;\n    }\n\n    .blog-container a {\n      color: #0066cc;\n      text-decoration: none;\n    }\n\n    .blog-container a:hover {\n      text-decoration: underline;\n    }\n\n    .blog-container img {\n      max-width: 400px;\n      width: 100%;\n      height: auto;\n      display: block;\n      margin: 2.8em auto;\n    }\n\n    .blog-container ol {\n      padding-left: 1.4em;\n    }\n  \u003c\/style\u003e","brand":"SHINMAX","offers":[{"title":"Default Title","offer_id":45909890826489,"sku":"P40800","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/5697\/7145\/files\/40800H_01.png?v=1736357233"},{"product_id":"40600","title":"13 inch Spiral Cutterhead Benchtop Planer","description":"\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ch2 style=\"line-height: 3px;\"\u003e\n\u003cb\u003eMotor\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage: 120V\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eCurrent\u003c\/span\u003e: 15A\u003c\/li\u003e\n\u003cli\u003eFrequency: 60Hz\u003c\/li\u003e\n\u003cli\u003eSpeed: 23000±10% RMP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"line-height: 3px;\"\u003e\u003cspan\u003e\u003cb\u003eCutterhead\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Spiral\u003c\/li\u003e\n\u003cli\u003eDiameter: 2”\u003c\/li\u003e\n\u003cli\u003eCutterhead \u003cspan\u003eSpeed: 10000 RPM\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlades: \u003cmeta charset=\"UTF-8\"\u003e \u003cspan\u003e26 \u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e \u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eTwo-sided Tungsten Carbide Inserts\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax Depth of Cut: ⅛\"\u003c\/li\u003e\n\u003cli\u003eMax Cutting Width: 13\"\u003c\/li\u003e\n\u003cli\u003eMax Stock Thickness: 6\"\u003c\/li\u003e\n\u003cli\u003eFeed Rate: 26 FPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"line-height: 3px;\"\u003e\n\u003cspan\u003e\u003cb\u003eEl\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e\u003cb\u003eevation \u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e\u003cb\u003eMechanism\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 Lead Screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"line-height: 3px;\"\u003e\u003cspan\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSnipe Minimizer ✓\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDepth of Cut Indicator ✓\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRepeat Cut Depth Stop ✓\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVersatile Flip Dust Hood ✓\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBoard returned Rollers ✓\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"line-height: 3px;\"\u003e\u003cspan\u003e\u003cb\u003eDimensions\u003c\/b\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOverall Size \u003cspan\u003e(w x d x h)\u003c\/span\u003e\u003cspan\u003e: 26¼\" x 34¼\" x 17⅜\"\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eExtension \u003cspan\u003eTable Size\u003cmeta charset=\"UTF-8\"\u003e (w x d): 14\" x 12\"\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDust Port Diameter: 2½” \u0026amp; 4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 68.3 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe loading=\"lazy\" width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/9jsIQMdd6SM\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch4\u003eProduct Links\u003c\/h4\u003e\n\u003ch5\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0267\/2007\/5879\/files\/CT-_40600H_ver.07.09.24.pdf?v=1728973752\" rel=\"noopener\" target=\"_blank\"\u003e40600H User Manual\u003c\/a\u003e\u003c\/h5\u003e\n\u003ch5\u003e\n\u003ca href=\"https:\/\/cutechtools.us\/pages\/warranty\"\u003e3 Year Limited Warranty\u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h5\u003e\n\u003ch4\u003e\u003cb\u003e\u003cspan\u003eComparisons\u003c\/span\u003e\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0267\/2007\/5879\/files\/Cutech_Planer_Comparison_20240506.png?v=1715032887\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 65px; top: 984.398px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SHINMAX","offers":[{"title":"Default Title","offer_id":45909891612921,"sku":"P40600","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/5697\/7145\/files\/Made_with_FlexClip_AI-2025-01-08T110835.png?v=1736357259"},{"product_id":"10-spiral-cutterhead-benchtop-jointer-cast-iron-tables","title":"10 inch Spiral Cutterhead Benchtop Jointer (Cast Iron Tables)","description":"\u003cdiv class=\"blog-container\"\u003e\n\u003cp\u003eSHINMAX’s 10-inch jointer delivers accurate flattening, squaring, and beveling in a compact, portable form. The spiral cutterhead shears wood cleanly in small increments to prevent tear-out, while the stable cast iron tables and adjustable fence keep the workpiece aligned for consistent results. Backed by a 12-amp motor, it maintains cutting power even on tough hardwoods – all in a size fit for small workshops or job sites.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003ch3\u003eClean, Accurate Cutting\u003c\/h3\u003e\n\u003cp\u003eThe 10-inch spiral cutterhead uses 20 tungsten carbide inserts arranged in a staggered pattern for smooth, tear-free surfaces on board faces and edges - even with hardwoods or complex grain. Each insert has two cutting edges: when one dulls, it can be rotated 90° to continue cutting with a fresh edge. And when both edges wear out, you can replace only the individual inserts instead of the entire knife set - helping to significantly reduce replacement costs. Two-sided inserts sit in perfect alignment with the spiral cutterhead, and the unused side prevents skewing during planing for greater accuracy and stability. This design ensures superior precision and finish quality compared to 4-sided inserts.\u003c\/p\u003e\n\u003ch3\u003eCompact Yet Stable Support\u003c\/h3\u003e\n\u003cp\u003eHeavy-duty cast-iron tables provide a flat, stable surface for accurate jointing. The main table measures 34” in length, with extension supports that increase the total working length to 54” - ideal for handling boards while keeping the machine compact and portable for smaller workshops.\u003c\/p\u003e\n\u003ch3\u003eStrong Motor Output\u003c\/h3\u003e\n\u003cp\u003eDriven by a 12-amp motor, the jointer delivers 19,000 RPM armature speed and 11,000 RPM cutterhead speed – enough power for clean, efficient cuts in demanding materials.\u003c\/p\u003e\n\u003ch3\u003eVersatile Fence Adjustments\u003c\/h3\u003e\n\u003cp\u003eThe 24-inch fence tilts for bevel cutting and locks at preset stops (90º and 135º) to ensure precise, repeatable angles for edge and bevel work.\u003c\/p\u003e\n\u003ch3\u003eEasy Depth Control\u003c\/h3\u003e\n\u003cp\u003eAdjusting the cutting depth is simple and precise. A smooth-turn elevation handle and clear red pointer let you set and check the depth at a glance. Beneath the surface, a dual guide-post mechanism supports the infeed table from both sides, guiding it straight up and down as you adjust. This keeps the table parallel to the cutterhead, prevents tilting, and ensures every pass produces a straight, even cut - no matter the setting.\u003c\/p\u003e\n\u003ch3\u003eEffective Dust Management\u003c\/h3\u003e\n\u003cp\u003eDual dust ports (2½\" and 4\") allow for secure connection to standard vacuums or dust collection systems, helping keep the workspace clean and ensuring clear visibility during operation.\u003c\/p\u003e\n\u003ch3\u003eBuilt-In Safety Features\u003c\/h3\u003e\n\u003cp\u003eIncludes a spring-loaded safety guard and pinch point shields that help prevent accidental contact with the cutterhead and moving components.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLooking for a jointer that balances power, precision, and portability? SHINMAX’s 10-inch jointer is ready to support your next woodworking project – explore more or \u003ca href=\"https:\/\/shinmaxind.com\/pages\/contact\"\u003eget in touch\u003c\/a\u003e today.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 120V \/ 12A \/ 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Speed (Armature):\u003c\/strong\u003e 19,000 RPM ± 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterhead Type:\u003c\/strong\u003e Spiral, 2” diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 11,000 RPM (Revolutions Per Minute)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlades\/Inserts:\u003c\/strong\u003e 20 two-sided tungsten carbide inserts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Depth of Cut:\u003c\/strong\u003e ⅛”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Cutting Width:\u003c\/strong\u003e 10”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFence Tilt Range:\u003c\/strong\u003e 90º and 135º (with preset stops)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Size (W × D × H):\u003c\/strong\u003e 34” (extendable to 54”) × 21¾” × 13¼”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size (L × W):\u003c\/strong\u003e 34” (extendable to 54”) × 10-3\/16”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFence Size (L × H):\u003c\/strong\u003e 24” × 4⅜”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 2½” \u0026amp; 4”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weigh:\u003c\/strong\u003e 79.5 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\n  .blog-container p {\n    font-size: 16px;\n    line-height: 1.6;\n    margin-bottom: 1.5em;\n  }\n\n  .blog-container h2 {\n    font-size: 28px;\n    line-height: 1.5;\n    margin-top: 2.4em;\n    margin-bottom: 1em;\n    font-weight: 700;\n  }\n\n  .blog-container h3 {\n    font-size: 20px;\n    line-height: 1.5;\n    margin-top: 2em;\n    margin-bottom: 0.8em;\n    font-weight: 700;\n  }\n\n  .blog-container h4 {\n    font-size: 18px;\n    line-height: 1.5;\n    margin-top: 2em;\n    margin-bottom: 0.8em;\n    font-weight: 700;\n  }\n\n  .blog-container ul,\n  .blog-container ol {\n    line-height: 2;\n    padding-left: 1.2em;\n  }\n\n  .blog-container a {\n    color: #0066cc;\n    text-decoration: none;\n  }\n\n  .blog-container a:hover {\n    text-decoration: underline;\n  }\n\n  .blog-container img {\n    max-width: 400px;\n    width: 100%;\n    height: auto;\n    display: block;\n    margin: 2.8em auto;\n  }\n\n  .blog-container ol {\n    padding-left: 1.4em;\n  }\n\u003c\/style\u003e","brand":"SHINMAX","offers":[{"title":"Default Title","offer_id":45909892301049,"sku":"JC10","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/5697\/7145\/files\/Made_with_FlexClip_AI-2025-01-08T110954.png?v=1736357138"},{"product_id":"12-spiral-cutterhead-benchtop-jointer-cast-iron-tables","title":"12 inch Spiral Cutterhead Benchtop Jointer (Cast Iron Tables)","description":"\u003cdiv class=\"blog-container\"\u003e\n\u003cp\u003eSHINMAX’s 12-inch jointer offers wide cutting capacity and robust motor power in a space-saving benchtop design. Equipped with a spiral cutterhead and 24 tungsten carbide inserts, this cast iron jointer delivers smooth, tear-free results when flattening faces, squaring edges, or beveling. Its heavy-duty cast iron tables extend up to 54 inches, providing solid support for longer or heavier workpieces. Combining portable size with professional precision, this 12-inch jointer is ideal for small workshops and light commercial use.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003ch3\u003eWide Cutting Capacity \u0026amp; Clean Finish\u003c\/h3\u003e\n\u003cp\u003eBuilt for wide boards and demanding hardwoods, the 12-inch jointer features a spiral cutterhead with 24 tungsten carbide inserts arranged in a staggered pattern. The spiral cutting action shears wood fibers cleanly, producing a smooth, tear-free surface even on dense or figured grain. Each insert has two cutting edges: when one becomes dull, it can be rotated 90° to use the other, extending service life. When both edges are worn, only individual inserts need replacement, reducing maintenance time and long-term replacement costs. Each two-sided insert sits in perfect alignment with the cutterhead, and its unused side prevents skewing during planing for precise, stable cuts. Compared with four-sided inserts, this design maintains sharper edges and more consistent alignment, ensuring superior accuracy and finish quality across the full 12-inch cutting width.\u003c\/p\u003e\n\u003ch3\u003eStable Support for Larger Workpieces\u003c\/h3\u003e\n\u003cp\u003eThe 34” heavy-duty cast-iron tables are precision-ground to tight tolerances, providing a flat, stable surface for accurate jointing. Extension supports increase the total working length to 54” for handling longer boards. Additional structural rods and full-size table supports enhance rigidity and maintain alignment when working with wide or heavy stock.\u003c\/p\u003e\n\u003ch3\u003ePowerful Motor for Demanding Cuts\u003c\/h3\u003e\n\u003cp\u003eA 12-amp motor drives the cutterhead at up to 11,000 RPM (19,000 RPM at the armature), ensuring clean and consistent results even when working with tough materials.\u003c\/p\u003e\n\u003ch3\u003ePrecise Fence Adjustments\u003c\/h3\u003e\n\u003cp\u003eThe 24-inch fence locks securely at preset stops of 90º and 135º, making it easy to switch between square-edge and bevel cuts. The sturdy locking system keeps the fence stable during operation, ensuring accurate alignment and consistent angles every time.\u003c\/p\u003e\n\u003ch3\u003eAccurate Depth Control\u003c\/h3\u003e\n\u003cp\u003eDepth settings are easy to adjust with a smooth-turn elevation handle and a clear red indicator that shows the cutting depth at a glance. A dual guide-post mechanism supports the infeed table evenly from both sides, keeping it parallel to the outfeed table and preventing tilt or inconsistencies. The result is straight, accurate cuts at any depth.\u003c\/p\u003e\n\u003ch3\u003eDust Collection for Cleaner Workspace\u003c\/h3\u003e\n\u003cp\u003eDual dust ports (2½” and 4”) connect easily to standard shop vacs or dust collectors, helping keep chips and debris off your work surface for better visibility and faster cleanup.\u003c\/p\u003e\n\u003ch3\u003eSafety-Focused Design\u003c\/h3\u003e\n\u003cp\u003eIntegrated pinch guards prevent finger pinching between extension bars and tables. The spring-loaded safety guard shields the portion of the cutterhead not in use.\u003c\/p\u003e\n\u003cp\u003eThe SHINMAX 12-inch cast iron jointer delivers professional-grade performance in a benchtop format – ideal for small workshops, retail channels, or OEM customization. \u003ca rel=\"noopener\" href=\"https:\/\/shinmaxind.com\/pages\/contact\" target=\"_blank\"\u003eContact us\u003c\/a\u003e to explore bulk orders, distribution opportunities, or tailored specs for your market.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 120V \/ 12A \/ 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Speed (Armature):\u003c\/strong\u003e 19,000 RPM ± 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterhead Type:\u003c\/strong\u003e Spiral, 2” diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 11,000 RPM (Revolutions Per Minute)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlades\/Inserts:\u003c\/strong\u003e 24 two-sided tungsten carbide inserts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Depth of Cut:\u003c\/strong\u003e ⅛”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Cutting Width:\u003c\/strong\u003e 12”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFence Tilt Range:\u003c\/strong\u003e 90º and 135º (with preset stops)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Size (W × D × H):\u003c\/strong\u003e 34” (extendable to 54”) × 23¾” × 13¼”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTable Size (L × W):\u003c\/strong\u003e 34” (extendable to 54”) × 12-3\/16”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFence Size (L × H):\u003c\/strong\u003e 24” × 4⅜”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 2½” \u0026amp; 4”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weigh:\u003c\/strong\u003e 87.10 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\n    .blog-container p {\n      font-size: 16px;\n      line-height: 1.6;\n      margin-bottom: 1.5em;\n    }\n\n    .blog-container h2 {\n      font-size: 28px;\n      line-height: 1.5;\n      margin-top: 2.4em;\n      margin-bottom: 1em;\n      font-weight: 700;\n    }\n\n    .blog-container h3 {\n      font-size: 20px;\n      line-height: 1.5;\n      margin-top: 2em;\n      margin-bottom: 0.8em;\n      font-weight: 700;\n    }\n\n    .blog-container h4 {\n      font-size: 18px;\n      line-height: 1.5;\n      margin-top: 2em;\n      margin-bottom: 0.8em;\n      font-weight: 700;\n    }\n\n    .blog-container ul,\n    .blog-container ol {\n      line-height: 2;\n      padding-left: 1.2em;\n    }\n\n    .blog-container a {\n      color: #0066cc;\n      text-decoration: none;\n    }\n\n    .blog-container a:hover {\n      text-decoration: underline;\n    }\n\n    .blog-container img {\n      max-width: 400px;\n      width: 100%;\n      height: auto;\n      display: block;\n      margin: 2.8em auto;\n    }\n\n    .blog-container ol {\n      padding-left: 1.4em;\n    }\n  \u003c\/style\u003e","brand":"SHINMAX","offers":[{"title":"Default Title","offer_id":45909892366585,"sku":"JC12","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/5697\/7145\/files\/401120HI_02.png?v=1736357020"}],"url":"https:\/\/shinmaxind.com\/collections\/frontpage.oembed","provider":"Shinmax Industry Co., Ltd.","version":"1.0","type":"link"}